Back
Next
Index
Attaching the DCS 645 to the Camera Body and Connecting Accessories
IMPORTANT:
Do not touch or strike the exposed IR filter or
anti-aliasing filter. Do not set the DCS 645 filter
side down on a surface.
Do not install the DCS 645 battery or connect the
AC adapter to the DCS 645 until it is mounted on
the camera body.
2 MAMIYA 645 AF or MAMIYA 645 AFD: Rotate
the Shutter release mode selector lever to L
(lock).
CONTAX 645: Rotate the main power switch
to the Off position (red mark not visible).
HASSELBLAD H1: Press and hold the red On-
Off button until the LCD is off.
To Next Page
Loading...
