Cephalometric Acquisition Interface Module
3–4 IMAGING SOFTWARE OVERVIEW
The Selector button enables you to access the following 3 panes:
• Program pane: Examination type options
• Patient pane: Patient type parameter options
• Parameters pane: Exposure parameter options
7 Positioning laser button: Activates the laser positionning beams to correctly position the
patient.
8 Reset button: Resets the rotative arm in the start position.
9 Ready Indicator LED
• Green indicates the unit is ready to start acquisition.
• Black indicates the unit is not ready to start acquisition.
10 Exit button: Closes the Acquisition Window.
11 X-Ray Emission indicator: Yellow, indicates the x-ray emission status.
12 Selector Button: Selects different acquisition setting options.
• Click Program to select examination type options.
• Click Patient to select patient type parameters.
• Click Parameters to select exposure parameter options.
To Next Page
Loading...
