What to do if the Kodak Medical Equipment interface is inactive?
If the interface of your Kodak Medical Equipment is inactive: 1. Ensure the unit is powered on. 2. Allow time for the unit and PC to establish a connection. 3. Verify that the Acquisition Window is not hidden behind another application; if so, close the obstructing application.
What to do if Kodak 8000C displays 'X-Ray tube cooling'?
If your Kodak Medical Equipment displays 'X-Ray tube cooling', wait until the Generator Cooling Indicator on the Acquisition Window reaches zero.
What to do if Kodak 8000C displays 'Thermal security'?
If the Kodak Medical Equipment displays 'Thermal security', wait until the Generator Cooling Indicator on the Acquisition Window reaches zero.
What to do if Kodak 8000C displays 'Release handswitch'?
If your Kodak Medical Equipment displays 'Release handswitch', release the exposure button of the x-ray remote control.
What to do if Kodak Medical Equipment displays 'Collimator position'?
If the Kodak Medical Equipment displays 'Collimator position', reposition the collimator.
What to do if Kodak 8000C Medical Equipment displays 'Cooling Ceph sensor'?
If your Kodak Medical Equipment displays 'Cooling Ceph sensor', wait until the Ready Indicator LED turns green.
What to do if Kodak Medical Equipment displays 'Wrong rotative arm position'?
If your Kodak Medical Equipment displays 'Wrong rotative arm position', press the button to reset the rotative arm to its starting position.
What to do if Kodak Medical Equipment displays 'Ceph sensor position'?
If the Kodak Medical Equipment displays 'Ceph sensor position', correctly position the sensor for: • LA, for lateral position • AP/PA, for all other radiological programs.
What to do if Kodak Medical Equipment displays 'Head clamps position'?
If your Kodak Medical Equipment displays 'Head clamps position', manually position the head clamps for the selected exam.
General| Brand | Kodak |
|---|---|
| Model | 8000C |
| Category | Medical Equipment |
| Language | English |
To Next Page
