Opening the Box
5–2 INSTALLING THE CEPHALOSTAT
Opening the Box
Before opening the cephalostat assembly box make sure that you have the required tool.
To open the cephalostat assembly box, follow these steps:
1. Remove the upper cardboard from the packaging. DO NOT cut through the
cardboard.
2. Remove the cephalostat arm.
3. Remove gently and set aside the cephalostat head cover.
4. Remove the protection elements. Lift off the packaging carton.
5. Remove gently the cephalostat head from the transport support and place it on the
ground.
6. Remove the other accessories.
To Next Page
Loading...
Need help?
General
