2-11
2
Using Camera
Self-Timer
Selecting the Self-Timer icon creates a 10-second delay between the time you
press the Shutter button and when the picture is taken. This allows you to include
yourself in the picture.
To activate the Self-Timer:
1 Turn the camera on.
2 Press the TAB button seven times.
The Self-Timer icon blinks.
3 Press the SELECT button.
The Self-Timer icon is highlighted.
4 Press the ENTER button to activate the Self-Timer option
5 Place the camera on a flat, steady surface or tripod.
6 Press the Shutter button.
The red Self-Timer light, located on the front of the camera, and the green
Ready Light, located on the back of the camera, turn on and stay lit for 8
seconds. The Self-Timer light flashes for 2 seconds just before the picture is
taken.
The Self-Timer returns to the off setting once the picture is taken.
☞ To stop the Self-Timer before the picture is taken, press the TAB button.
Self-Timer Off
Self-Timer On
To Next Page
Loading...
Need help?
General
