2-19
2
Using Camera
Moving Pictures into Albums
The Change Album feature allows you to move previously taken pictures into
albums on the DC120’s memory or the optional Kodak Picture Card.
☞ The camera does not have to be turned on to use the PLAY-STOP option.
You cannot take a picture when PLAY-STOP is on.
To Exit: Press the SELECT button until the EXIT option is highlighted and then
press the ENTER button. To return to a picture display screen, press the VIEW
button.
1 Press the PLAY-STOP switch.
The LCD displays the last picture taken.
☞ Scroll through the pictures by
pressing the TelePhoto or Wide
Angle buttons.
2 Press the MOVE-ERASE button.
The MOVE-ERASE display appears with
CHANGE ALBUM highlighted. The
MOVE TO CARD option is grayed out if
a card is not inserted in the camera.
3 Press the ENTER button.
A display appears with NO ALBUM
highlighted.
4 Press the TAB or SELECT button until
the correct album is highlighted.
☞ If necessary, press the TelePhoto or
Wide Angle buttons until the correct
picture appears in the bottom right-
hand corner.
5 Press the ENTER button.
The picture is moved into the identified
album.
PLAY • STOP
TAB SELECT ENTER
VIEW INFOMOVE • ERASE
1
PLAY • STOP
TAB SELECT ENTER
VIEW INFOMOVE • ERASE
MOVE TO CARD
MOVE PICTURE
MOVE ALL
EXIT
12
CHANGE ALBUM
ERASE
EXIT
PLAY • STOP
TAB SELECT ENTER
VIEW INFOMOVE • ERASE
ALBUM 1
MOVE PICTURE
MOVE ALL
EXIT
12
ÒNO ALBUMÓ
ALBUM 2
ALBUM 3
To Next Page
Loading...
Need help?
General
