2-12
Pictures Remaining
The Pictures Remaining icon changes automatically to indicate the following:
✔ Focus distance of camera, while in Macro mode
✔ Auto Exposure (plus or minus) amount, while it is being changed
✔ Manual Exposure shutter speed, while it is being changed
✔ Album number, while it is being changed
✔ error codes (see Chapter 9 - Troubleshooting for more detailed
information)
✔ remaining number of pictures which can be stored at the current Picture
Quality setting in the camera’s internal memory. If an optional Kodak
Picture Card is inserted this indicates remaining space on the card. To
check the camera’s memory, the card must be removed.
☞ The Pictures Remaining number does not always change when a
picture is taken if the picture content is easily compressed.
✔ when the camera’s or optional Kodak Picture Card’s memory is full the
Status Display indicates FUL and you must erase the existing pictures to
capture additional pictures. To save pictures, transfer them to your
computer before erasing them. For more information on how to erase
pictures, see “Erasing Pictures from the DC120 or Kodak Picture Card”
on page 2-21 or the software chapters on how to move pictures from the
DC120 to your computer.
☞ If the optional Kodak Picture Card is full you will not be able to take
any more pictures. Remove the card and, if the camera memory is
not full, you can take additional pictures.
You may not select or change the Pictures Remaining icon.
To Next Page
Loading...
Need help?
General
