8-9
8
Mounter
Serial Port
The Serial Port tab on the Camera Properties window allows you to view and
change the serial port and port speed settings while the camera is attached to your
computer.
See the “Checking Serial Port Availability” section in Chapter 3 - Using DC120
with Your Computer for more detailed information.
To open the Serial Port window:
1 Click on the Camera icon with the right mouse button.
2 Select Camera Properties from the popup menu.
The Camera Properties window appears.
3 Click the Serial Port tab.
The Serial Port Tab appears.
4 If necessary adjust the:
✔ serial port if your computer
does not recognize the
camera
✔ port speed to optimize picture
transfer time
☞ The port speed of 230400 is
only available on PCs or
Macintosh PowerPCs with
high-speed serial cards.
To Next Page
Loading...
