Printer Overview
4 www.kodak.com/go/aiosupport
Configuring printer settings
NOTE: When you first power on the printer, the LCD prompts you to select the
Language and Country/Region.
To set or change basic printer settings:
1. Press Home.
2. Press to select Printer Settings, then press OK.
3. Press to select one of the following settings:
• Date and Time
–Press OK, then press to select Ye a r , Month, Day, Hour, or Minute.
Press or to change the values; press OK when you are done.
NOTE: You can also synchronize the printer date and time to your computer using
the Home Center software.
• Button Sounds
–Press to select On or Off.
• Ti m e t o Lo w Po w e r
–Press to change the time to energy-saving low power (select from 1 to 4
hours in 0.5 hour increments). After the time to low power, the printer
enters a low-power mode.
• Language
–Press OK, press to select a language, then press OK.
• Country/Region
–Press OK, press to select a country or region, then press OK.
• Reset All Settings (see Resetting factory defaults, page 65)
NOTE: Resetting factory defaults does not change the date and time, language,
country/region, or network settings.
4. Press Back to return to the Main Menu.
To Next Page
Loading...
