www.kodak.com/go/aiosupport 27
4
Printing
Print documents and lab-quality pictures on your printer.
Printing documents
To print a document:
1. Open the document on your computer.
2. Select File > Print.
3. In the Print dialog box, select your KODAK Printer.
4. Choose the pages to print, number of copies, etc, then click OK (on a computer
with WINDOWS OS) or
Print (on a computer with MAC OS).
Printing two-sided documents
Print two-sided documents either automatically with the built-in duplexer or by
manually rotating and reloading the paper.
Automatic two-sided printing
The duplexer can print two-sided documents automatically on plain paper in the
following standard sizes:
• letter (8.5 x 11 in. / 22 x 28 cm)
• A4 (8.3 x 11.7 in. / 21 x 30 cm)
• executive (7.3 x 10.5 in. / 18 x 27 cm)
• B5 (6.9 x 9.8 in. / 18 x 25 cm)
NOTE: The paper width must be 3.9 to 8.5 in. / 10 to 22 cm. The paper length must
be between 7 to 11.7 in. / 18 to 30 cm.
The duplexer cannot print:
• borderless prints
•poster layout
Automatic two-sided printing from a computer with WINDOWS OS
To print two-sided documents from a computer with WINDOWS OS using the
duplexer:
1. Load plain paper into the paper tray.
2. Open the document you want to print, then select File > Print.
3. In the Print dialog box, make sure that KODAK ESP Office 6100 Series AiO is
selected, then click
Properties.
4. Select the Layout tab.
5. Select Automatically with Duplexer, then click OK.
6. Click OK.
To Next Page
Loading...
