www.kodak.com/go/aiosupport 69
KODAK ESP Office 6100 Series All-in-One Printer
Status lights
There are two status lights on the printer: one indicates power, the other indicates
Wi-Fi status.
Power status light
Wi-Fi status light
Power light What it means
Off The printer is turned off.
• Press the on/off button to turn on power.
The printer does not have power.
• Make sure that the power cord is plugged into the back of the
printer and into an electrical outlet, and that the electrical
outlet has power.
Blinking The printer is busy.
• Wait for the printer to finish the task.
On The printer is ready.
Wi-Fi status light What it means
Off The Wi-Fi radio is either turned off or is turned on but not
connected to a wireless network.
Blinks continuously The Wi-Fi radio is turned on and the printer is searching for
available wireless networks within range.
Blinks intermittently
The Wi-Fi radio is turned on and the printer cannot find any
available wireless networks within range, or the Wi-Fi radio
connection has been interrupted or is too weak to send signals.
To find and connect to an available wireless network within
range, press OK, turn the Wi-Fi radio off, and run the WiFi Setup
Wizard (see
Connecting to a wireless network using the WiFi
Setup Wizard, page 6).
On The Wi-Fi radio is turned on and there is a working connection
between the printer and a wireless network.
To Next Page
Loading...
