Kodak ESP Office 6150 - All-in-one Printer - Scanning from the Control Panel

www.kodak.com/go/aiosupport 39
KODAK ESP Office 6100 Series All-in-One Printer
Scanning from the control panel
To scan a document or a picture from the control panel:
1. Load the original.
2. Press and hold Scan for one second.
The Scan Options menu appears on the LCD.
3. Press to select an option, then press or to change the setting.
4. Press Start Black to make a black-and-white scan, or press Start Color to make a
color scan.
The scanned file appears at the destination you specified.
Scan Option Settings Description
Scan To USB-connected
computer
(default)
The scanned file is sent to the
USB-connected computer.
Name of computer
(only if a computer is
connected by
wireless or Ethernet
network)
The scanned file is sent to the
computer on the wireless or Ethernet
network.
Scan What Document
(default)
Sets the scan settings for scanning a
document (
see Changing the scan
settings for scanning from the
control panel, page 36).
Photo
Sets the scan settings for scanning a
photograph (
see Changing the scan
settings for scanning from the
control panel, page 36).
Destination File
(default)
Sends the scanned file in the format
and to the location on your computer
that you designate (
see Changing the
scan settings for scanning from the
control panel, page 36).
Application Sends the scanned file to Home
Center Software.
Save as Defaults No / Yes To save the settings as the new
default, press
OK. With Ye s selected,
press
OK.