Faxing
50 www.kodak.com/go/aiosupport
4. Press to select Resolution.
The resolution setting determines the amount of detail that is transmitted.
Select:
• Standard (default) for most documents
• Fine for documents with fine print
• Photo for photographs
5. Press to select Brightness.
Adjust the brightness setting according to how light or dark your original is.
Select:
• Normal (default) for most documents
• +1 to +3 to lighten dark originals
• -1 to -3 to darken light originals
NOTE: If you do not want to save these settings, send your fax. The settings will
apply only to the current transmission. If you do want to save these settings
as defaults:
a. Press to select Save as Defaults, then press OK.
b. Select Ye s , then press OK.
Sending a fax
You can send your fax in several ways. You can use:
• the phonebook
• Quick Dial
•the numeric keypad
• the Redial button
Using the phonebook to send a fax
To send a fax to a number in the phonebook:
1. Press and hold Phonebook until the phonebook opens.
2. Press to select the desired number.
3. Press Start Black to send a black-and-white fax or Start Color to send a color fax.
Using Quick Dial to send a fax
To send a fax using Quick Dial:
1. Press and hold Phonebook until the phonebook opens.
2. Press the number on the keypad that corresponds to the desired Quick Dial
entry.
3. Press Start Black to send a black-and-white fax or Start Color to send a color fax.
To Next Page
Loading...
