Handling Paper
22 www.kodak.com/go/aiosupport
5. Fan and stack the photo paper, then insert the paper (short side first) into the
tray with the
logo side facing up and the glossy side down.
IMPORTANT: If the photo paper is loaded the wrong way, the ink on your pictures will be
wet and the image quality will be affected.
6. Move the paper forward until it stops.
7. Move both the left and front paper-edge guides until they touch the paper.
8. Push in the paper tray until it clicks into place, and lower the output tray.
NOTE: If you are using 8 x 10 in. / 20 x 25 cm or larger photo paper, pull out the
output tray extender until it is fully extended, and lift the paper stop.
To Next Page
Loading...
Need help?
General
