Kodak ESP Office 6150 - All-in-one Printer - Receiving a Fax

www.kodak.com/go/aiosupport 45
KODAK ESP Office 6100 Series All-in-One Printer
Setting the answer mode (auto answer or manual)
The default setting is for Auto Answer to be on. When Auto Answer is on, the
printer picks up all incoming faxes automatically. The green Auto Answer LED is lit
when Auto Answer is on.
To answer calls manually, turn off Auto Answer by pressing the Auto Answer button
so that the green LED is off. (
See “Receiving a fax manually” on page 52.)
Dialing Mode Tone (default) / Pulse Determines how the printer dials a fax
number.
Tone dialing (the more common
method) uses tones to dial a phone
number. It is faster and more reliable
than pulse dialing, which uses a series of
pulses to dial a phone number.
Traditionally, pulse dialing was used by
rotary phones; tone dialing is used by
touch-tone phones.
Error Correction On (default) / Off Error correction is applied only when
sending black-and-white faxes. It
reduces the loss of data, which can occur
on poor phone lines.
Error correction increases the send time
on poor phone lines, but the
transmission is much more reliable.
(Error correction does not apply to faxes
being received.)
Fax Option Settings Description