3-2 A-61560 January 2010
3. Adjust the side guides (by sliding them in or out) to accommodate
the size of documents you are scanning.
4. Adjust the input tray. You can scan documents with the input tray
open or closed. Feed documents with the input tray open if you are
scanning a batch of documents.
If space is limited and you want to close the input tray, you can easily
feed documents one at a time.
5. Adjust the output tray to accommodate your scanning needs.
• The standard output tray can be positioned so it lies flat on the
table. This position works well for scanning a few pages at a
time.
Input tray - open position Input tray - closed position
To Next Page
Loading...
