Kodak i1220 Plus - System Requirements

A-2 A-61560 January 2010
System requirements Following is the minimum recommended system configuration to run
Kodak i1200/i1300 Plus Series Scanners.
• Recommended processor and memory:
- For documents up to 356 mm (14 in.) long up to 300 dpi: 3.2 GHz
Intel Pentium IV processor with 1 GB of RAM
- For documents up to 660 mm (26 in.) long up to 400 dpi: 3.2 GHz
Intel Pentium IV processor with 2 GB of RAM
- For longer documents/higher resolutions: 3.2 GHz Intel Pentium
IV processor with 3 GB of RAM
- For Windows 7 x64 bit
• For documents up to 660 mm (26 inches) long up to 400 dpi:
32 GHz Intel P4 processor with 2 GB RAM
• For longer documents/higher resolutions: 3.2 GHz Intel P4
processor with 4 GB RAM
• USB port 2.0 (compatible with USB 1.1 but at slower speeds)
• 200 MB free hard disk space
• Supported operating systems:
- Microsoft Windows 7 (32-bit and 64-bit)
- Microsoft Windows Vista (32-bit and 64-bit); SP2
- Microsoft Windows XP SP2/SP3 (32-bit)
- Microsoft Windows XP SP2 x64 Edition
- Microsoft Windows 2003 Server R2 x64 Edition (TWAIN only)
- Linux Ubuntu 9.04
- Linux SUSE 11.1
- Linux Fedora 10
Included Drivers:
• Windows operating systems: TWAIN, ISIS, WIA
• Linux distributions: TWAIN and SANE
Power Consumption -
Scanner
Off mode: <4 watts
Running: <35 watts
Power Consumption -
with A3 Flatbed
Off mode: <
6 watts
Running: <65 watts
Power Consumption -
with A4 Flatbed
Off mode: <
6 watts
Running: <57 watts
Acoustic Noise
(Sound Pressure level)
Operating: less than 58 dB(A)
Off mode: less than 30 dB(A)
Bundled Software Nuance ScanSoft PaperPort Software / for Kodak Scanners
Nuance ScanSoft OmniPage Pro Software / for Kodak Scanners
Nuance ScanSoft PaperPort Deluxe Software, Asian / for Kodak Scanners