130
Message Description Action
Cannot change settings
under this mode.
Appears during shooting mode if a
function can not be set by rotating the
function ring.
Remove the message after
2 seconds and return to
shooting.
Improper alignment.
Please try again.
The offset is too big for panorama
shooting.
Remove the message after
2 seconds and return to
shooting.
Connection Failed!
In the case of failing to connect to a PC
or a printer.
In the case of failing to connect to a TV-
system (including HDMI).
Remove cable and retry
connection
In this capture ********
Still size limited to ** M
After choosing the image size in the
Function Ring (Smart), this message
may occur when the still size limit is
reached.
Remove the message after
2 seconds and return to
shooting.
Capture reached
maximum limit
Press the shutter to capture images
in recording a video. If the number of
images captured exceeds 15, there will
be a prompt if you press the shutter
again.
The message will
disappear in 2 seconds
with no influence to video
recording.
To Next Page
Loading...
