49
Custom Settings
The user can store the frequently used
shooting modes and parameters and switch to
this mode for quick adjustment.
Settings under mode (unset state or state
after reset):
1. Turn the mode dial to select the mode,
and enter the setup screen, as shown in the
figure below:
Select one capture mode to define CS .
Auto Mode
Confirm
Exit
2. As shown in the figure, press the [ ]/
[ ] button to select a capture mode that
you want to define as , and press the
button to enter the shooting screen.
3. As shown in the figure, press the button,
and choose whether to continue the
mode setting or rotate the mode dial to skip.
Or
Go to setting CS mode
Rotate the mode dial to skip.
Yes
For setting under other modes (use this
method to select a different custom setting):
1. Select any mode to be stored.
2. Set your desired parameters in the current
mode.
3. Press the button, press the [ ]/
[ ] button to select , and press
the button to enter the menu.
4. Press the [ ]/[ ] button to select
To Next Page
Loading...
