Functions that can be enabled under each
mode may be different.
Mode：
For setting the single, continuous shot,
Time-Lapse, HDR , WDR or AE bracketing
functions.
Please follow the following steps to set:
1. Press the button to enter the continuous
shot menu.
Single
2. Press the [ ]/[ ] button to select
the following 8 modes:
• Single
Capture a single shot only.
• Continuous Shot
For taking more than one picture
continuously.
• Cont.Shot-Fast (2M)
For continuous shot with 2M pixels.
• Cont.Shot-High Speed (VGA)
For continuous shot with VGA pixel.
• Time-Lapse
Take pictures based on the preset
interval (30sec/ 1min/ 5min/ 10min).
Press the button to select the
interval time.
• HDR (-1EV, 0EV, +1EV)
This setting is to control the high
dynamic image range in taking
still pictures, with vivid effect in
highlight and that the effect in dark
parts can identify the outline and
depth of the object. (Use of tripod is
recommended)
Continuous Shot Mode
To Next Page
Loading...
