40
Settings of Smart Device:
1. Enable the Wi-Fi of smart device and then
search surrounding wireless devices.
2. Select the name of camera SSID to be
connected and then input the eight-digit
number password after WPA2PSK on the
camera.
3. Click the icon of the APP to enable the APP.
Set up completion:
Once the APP is connected to the camera,
functional operations can be enabled on the smart
device.
Station
Enable image transmission and remote control by
connecting the camera with a Wi-Fi access point
created by your smart device.
1. Enable the Wi-Fi access point of smart device.
2. Select the on camera and then press the
button to conirm connection with smart
device.
3. Press the up/down buttons to select the name
of smart device to be connected and then press
the button to conirm. Then, the camera
enters the password input interface.
Station
Wi-Fi Mode
Device1-SSID
Device2-SSID
Device3-SSID
Searching for devices.
*SSID
6FDQ%DFN
To Next Page
Loading...
