Kodak PIXPRO WPZ2

92
PICTBRIDGE™ technology allows printing of the
photos saved on the memory card by a printer.
To ind out if a printer is PICTBRIDGE™ compatible,
simply look for the PICTBRIDGE™ logo on the
packaging or check the owner's manual for
speciications. With the PICTBRIDGE™ function on
your camera, you can print the captured photos
directly to a PICTBRIDGE™ compatible printer
using the supplied USB cable, without the need for
a PC.
Setting the USB Mode
The camera’s USB port can be set to connect with
either a PC or a printer. The following steps will
ensure that the camera is correctly conigured to
connect with a compatible printer.
1. Press the button, press the up/down arrow
buttons to select and press the button to
enter the menu.
2. Press the up/down arrow buttons to select
and press the button or right arrow button to
enter the menu.
Connecting to PICTBRIDGE™ Compatible Printers
3. Press the up/down arrow buttons to select
[USB] and press the button or right arrow
button to enter the menu.
4. Press the up/down arrow buttons to select
[Printer] and press the button to conirm.
USB
PC
Printer
After the camera is reset, it will switch to PC
mode automatically from USB Mode.
See “Using the PICTBRIDGE™ Menu“ section
on page 94.