Maintenance
Exhaust gas aftertreatment system (depending on configuration)
Fig. 88: Connecting the heating mat connector
u Connect the electrical connector of the filter heating mat.
u Run the system for 30 minutes to confirm successful priming and leak-free operation.
Information
After replacing the filter, take a snapshot with KoDIA. Note the ID of the filter in the comment of
the snapshot.
Send the snapshot to Kohler service representative.
140
© 2022 by Kohler Co. All rights reserved.
KD62V12 33521030301_8_1 EN_US 2022-09
To Next Page
Loading...
