Kohler KD62V12 Operation And Maintenance Manual

Contents
8.3.1 Cleaning agents and thread-locking adhesives
183
8.3.2 Greases
183
8.4 Standard tightening torques
184
8.4.1 Lubricant and threadlocker application rules
184
8.4.2 Screws pre-tightening, reuse, and marking
184
8.4.3 Standard torques for hexagonal / socket / flange screws and
hexagonal / flange nuts 187
8.4.4 Standard torques for internal drive pipe plug with conical thread
188
8.4.5 Standard torques for screws according to DIN 7643, DIN 910, DIN 908
188
8.4.6 Standard torques for flange joints
190
8.4.7 Assembling pipes with cutting rings
196
8.4.8 Standard torques for triple lock flange joints
197
8.4.9 Standard torques for VSTI screw plugs for steel and iron cast part
198
8.4.10 Standard torques for VSTI screw plugs for aluminium
199
8.4.11 Assembling pipes with DKO connectors (EL, ET, EW, GZ, GZR, RED)
201
8.4.12 Standard torques for collar clamps
202
8.4.13 Standard torques for pipe clamps according to DIN 3015
203
8.5 Abbreviations - Acronyms
204
8.6 Unit conversion tables
206
8.6.1 Length conversion factors
206
8.6.2 Mass conversion factors
206
8.6.3 Pressure conversion factors
206
8.6.4 Volume conversion factors
206
8.6.5 Power conversion factors
207
8.6.6 Moment of inertia and torque conversion factors
207
8.6.7 Factors of fuel consumption conversion
207
8.6.8 Flow conversion factors
207
8.6.9 Temperature conversion factors
207
8.6.10 Density conversion factors
207
8.7 Prefix
209
16
© 2022 by Kohler Co. All rights reserved.
KD62V12 33521030301_8_1 EN_US 2022-09

Kohler KD62V12 Specifications

General

Brand	Kohler
Model	KD62V12
Category	Engine
Language	English