SAFETY INFORMATION
3
29
EN
3.3 Safety signal description
To ensure safe operation please read the following statements and understand their meaning.
•
Also refer to your equipment manufacturer's manual for other important safety information.
•
This manual contains safety precautions which are explained below.
•
Please read them carefully.
The following is a list of the adhesive safety plates that may be found on the engine, which indicate
potential points of danger to the operator.
Read the Operation and Maintenance handbook before performing any operation on the
engine.
Danger of burns.
Presence of rotating parts.
Danger of jamming or cutting.
Presence of explosive fuel.
Danger of fire or explosion.
Presence of steam and pressurized coolant.
Danger of burns.
Hereunder is a list of safety warnings that may be found in the manual, which advise you to pay
attention when carrying out particular procedures that may be potentially dangerous to the operator or
This indicates situations of grave danger which, if ignored, may seriously threaten the
health and safety of individuals.
This indicates particularly important technical information that should not be ignored.
To Next Page
Loading...
Need help?
General