6
INFORMATION ABOUT REPLACEMENTS
EN 48
6.2 Oil filter cartridge replacement
•
Before proceeding with operation, read Par. 3.2.2
Warning:
•
Oil filter cartridge replacement (Par. 6.2) and fuel filter replacement ( Par. 6.3
).
•
In case of low use replace it 12 months.
•
For disposal of oil filter cartridge and fuel filter refer to Par. 6.6 DISPOSAL and SCRAPPING .
Important:
•
Electric/pneumatic screwdrivers are forbidden
1.
Unscrew cartridge holder cover A by performing three
complete turns and wait 1 minute.
NOTE: This operation allows to oil contained in the support
F to flow into the oil sump in the correct way.
2.
Unscrew cartridge holder cover A and check that the
oil in the lub. oil filter support F has flowed towards the
oil sump.
3.
Remove the cap A as well as the oil cartridge B from
the oil filter support.
4.
Remove and replace the oil cartridge B with a new one.
Remove and replace the gaskets C, D and E with new
ones.
6.4
6.5
5.
Fit and tighten the cover A on the oil filter support F,
tightening it with a torque wrench G (tightening torque
of 25 Nm).
6.6
NOTE: Click on the icon to play the procedure.
https://www.youtube.com/embed/
eTL3NSUrZHQ?rel=0?rel=0
To Next Page
Loading...
Need help?
General