Kohler M340+ User Manual

2-6 Operation TP-5672 11/95
Sequence of Operation Programmed Transition Switch
When the Normal Source Fails
NOTE
When a programmed transition switch is ordered, the
inphase monitor option is disabled by the
microprocessor.
1. The source-available, normal LED turns off.
2. The time-delay-engine-start ON LED illuminates
to indicate the engine-start-time-delay is timing.
3. The time-delay-engine-start END LEDilluminates
to indicate the engine has been signaled to start.
4. The source-available emergency LED illuminates
after the generator is at rated voltage and
frequency.
5. The time-delay normal-to-emergency ON LED
illuminates to indicate the normal-to-emergency
time delay is timing.
6. The time-delay normal-to-emergency END LED
illuminates to indicate the time delay has
completed timing.
7. The load-shed LED illuminates at the same time
all loads to be shed are disconnected from the
switch (if equipped with load-shed option).
8. After the load-shed time-before-transfertimerhas
completed timing, the contactor transfers to the
Off position. The contactor-position normal LED
turns off and the contactor-position Off LED
illuminates.
9. The time-delay-off-position ON LED illuminates to
indicate the Off position time delay is timing.
10. The time-delay-off-position END LED illuminates
to indicate the time delay has completed timing.
11. The contactor transfers to the emergency
position. The contactor-position Off LED turns off
and the contactor-position emergency LED
illuminates.
12. After the load-shed time-after-transfer timer
completes timing, the selected loads for the
emergencysourcearereturnedtotheswitch.The
load-shed LED turns off (if equipped with
load-shed option).

Kohler M340+ Specifications

General

Brand	Kohler
Model	M340+
Category	Switch
Language	English