Safety Precautions and Instructions V
TP-5672 11/95
Hazardous voltage can cause severe injury or
death. To prevent the possibility of electrical shock,
de-energize the normal power source to be connected
to the transfer switchbefore making any lineorauxiliary
connections.
Hazardous voltage can cause severe injury or
death. De-energizebothnormalandemergencypower
sourcesbeforeproceeding. Movegeneratorsetmaster
switch on controller to OFF position and disconnect
battery negative (--) before working on transfer switch!
Turn the transfer switch selector switch to the OFF
position.
Hazardous voltage can cause severe injury or
death. Disconnect inner panel harness at in-line
connector. This will de-energize circuit board and logic
circuitry, but allow transfer switch to continue to supply
utility power to necessary lighting and equipment.
Hazardousvoltagewillexistifanyaccessoriesmounted
to inner panel are NOT wired through the inner panel
harness and de-energized by in-line connector
separation. Such accessories are at line voltage.
To Next Page
Loading...
Need help?
General
