KOLARC MX600 - Brief Description of Duo Pulse; Position Welding; Brief Description of MIG;MAG Pulsed Synergic Welding; Brief Description the Gouging (Arc Air Gouging); General

23
Duo Pulse is used for standard synergic and pulsed synergic processes. Position is used in vertical-up
and over head welding positions.
With the cyclic variation of the welding power between the two operating points, with Duo Pulse and
Position, an aesthetic seam appearance and a discontinuous one input are obtained.
Brief description
of MIG/MAG
pulsed synergic
welding
MIG/MAG pulsed synergic
MIG/MAG pulsed synergic welding is a pulsed arc process with a controlled material transfer.
In the base current phase, the energy input is reduced to such an extent that the arc
barely burns steadily and the surface of the workpiece is preheated. In the pulsing current
phase, an accurately timed current pulse guarantees a precise detachment of the
weld material droplet.
This principle guarantees low-spatter welding and precise operation throughout the
entire power range.
Brief description
of Duo Pulse /
Position welding
Brief description
of the gouging
(Arc Air Gouging)
In arc air gouging, an arc is ignited between a carbon electrode and the workpiece; the
parent material is melted and blown out with compressed air.
The operating parameters for arc air gouging are defined in a special characteristic.
Applications:
- Removal of shrink holes, pores, or slag inclusions from workpieces
- Detaching sprues or the processing of entire workpiece surfaces in foundries
- Edge preparation for heavy plates
- Preparation and repair of weld seams
- Finishing of roots or defects
- Production of air gaps
System Components
The functions are all arranged in an intuitive way on the control panel. The individual parameters
required for welding can be
- Selected by means of buttons
- Changed using buttons or the selection dial
- Shown on the digital display during welding.
Due to the synergic function, all other parameters are also adjusted if a single parameter
is changed.
NOTE!
Because of software updates, certain functions may be available for your device
but not described in these Operating Instructions or vice versa.
In addition, individual figures may also differ slightly from the operating elements of your
device. However, the function of these operating elements is identical.
General
WARNING!
Safety
Danger from incorrect operation and work that is not carried out properly.
Serious personal injury and damage to property may result.
▶ Read and understand this document.
▶ Read and understand all the Operating Instructions for the system components,
especially the safety rules.