KOLARC MX600 - Gas-Cooled MIG;MAG Welding; General; Manual Metal Arc Welding; Minimum Equipment for Arc Air Gouging

30
Minimum Equipment For Welding Operations
General Depending on the welding process, a minimum level of equipment is required to work
with the power source.
The following describes the welding processes and the corresponding minimum equipment
for welding operations.
Gas-cooled
MIG/MAG welding
- Power source
- Grounding cable
- Gas-cooled MIG/MAG welding torch
- Gas connection (shielding gas supply)
- Wirefeeder
- Gas-cooled interconnecting hosepack
- Wire electrode
Water-cooled
MIG/MAG welding
- Power source
- Cooling unit
- Grounding cable
- Water-cooled MIG/MAG welding torch
- Gas connection (shielding gas supply)
- Wirefeeder
- Water cooling option
- Water-cooled interconnecting hosepack
- Wire electrode
- MX600 / MX500 / MX400 Syn power source
- Grounding cable 120 mm²
- Welding torch
- Compressed air supply
- Power source
- Grounding cable
- Electrode holder
- Rod electrodes
Manual metal arc
welding
Minimum
equipment
for arc air
gouging