4
Operation of Safety Plug
Note: Electrical products should not be disposed of with household waste. Please contact your
local recycling center for more information on how to recycle electronic waste.
Your air conditioner is supplied with a Leakage-Current Detection and Interruption (LCDI) safety plug. This device
provides protection to reduce the risk of re due to arcing faults in the power supply cord. Before using your air
conditioner, follow the instructions below to ensure that the h plug is working properly:
1. Plug the power cord into a grounded outlet.
2. Press the TEST button on the LCDI plug. This should trip the plug and cut the power to the air conditioner. If
the plug does not trip and you are able to turn on the unit, please contact Koldfront support.
3. Press the RESET button to start using your air conditioner.
Note:
• Always make sure the RESET button is pushed in for proper operation.
• The power supply cord with LCDI plug must be replaced if it fails to reset.
• Do not use the TEST and RESET buttons as an ON/OFF switch.
To Next Page
Loading...
Need help?
General
