KT-70E / KT-90E / KT-70SE User Manual Page 11 of 59 24 April 2018
Operator seminars, and art workshops are offered regularly by the manufac-
turer.
The following are examples of topics for training as well as a form for con-
firmation of instruction.
1.11.2. Examples of training topics
1. For safety
• Accident prevention regulations
• General legislation
• General safety
• Measures in case of emergency
• Personal protective equipment
• Safety instructions for the operation of the plant
• Dealing with the safety devices of the system
• Safety devices in the vicinity of the plant
• Meaning of symbols and signs
• ________________________________
• ________________________________
2. To operate the plant
• Use the operating elements
• Explanation of the operating instructions for the operating person-
nel
• Special experience of the operator in handling the compressor
• The use of input materials, tools and auxiliary equipment
• ________________________________
• ________________________________
3. Servicing and maintenance requirements
• Regulative handling cleaning agents and lubricants
• Special experience of the operator for maintenance, servicing, cleaning
and maintenance of plant
• ________________________________
• ________________________________
1.12. Symbols Used
In the manual, the following terms and symbols for particularly important
information are used:
information
Special information regarding the economical use of the machine
To Next Page