EasyManua.ls Logo

Komptec KT-90E - Personnel Selection and Qualification; Fundamental Obligations; Safety Instructions for Certain Operating Phases

Komptec KT-90E
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KT-70E / KT-90E / KT-70SE User Manual Page 19 of 59 24 April 2018
In addition to the operating instructions are generally applicable statutory and other bind-
ing regulations for accident prevention and environmental protection which must be ob-
served.
All safety instructions and warnings at / on the compressor must be kept complete in a
legible condition!
Any changes to the compressor or its operating behavior must be immediately reported
to the appropriate authority!
Changes, additions or conversions to the compressor, which could impair safety must not
be carried out without the supplier's approval
Spare parts must meet the technical requirements specified by the manufacturer. This is
always guaranteed with original spare parts!
3.2.3. Personnel selection and qualification; fundamental obligations
Working with the compressor may only be carried out by qualified personnel.
Responsibilities of the personnel for operation, maintenance, repair must be clearly de-
fined!
Only authorized personnel should operate the compressor!
Make sure that training must be performed by an experienced person!
Work on electrical equipment of the compressor may only be performed by a qualified
electrician or by instructed persons under the direction and supervision of a qualified
electrician in accordance with regulations.
3.2.4. Safety instructions for certain operating phases
Normal operation
Insure that the compressor is operated only in safe and reliable state! The compressor may
only be operated when all protective devices and safety-related equipment, sound insula-
tion and intake devices are in place and functioning!
Check for externally visible damage in pressure vessels and filling hoses before operating
the compressor! Immediately report any changes (including the operating performance)
to the competent authority / person! Stop the machine immediately if there are any con-
cerns!
In case of malfunction, the compressor must be shut down immediately and secured!
Faults must be eliminated immediately!
Before switching on / starting the compressor, make sure that nobody can be endangered
by the compressor.

Table of Contents