KT-70E / KT-90E / KT-70SE User Manual Page 45 of 59 24 April 2018
10.4.3. Oil Change
1. Run about 1-2 minutes be-
fore changing the oil the
compressor
2. Turn off the compressor
and unplug
3. Let the compressor rest for
a few minutes.
4. Compressor carefully put
aside.
5. Open oil drain plug (with
6mm Allen key)
6. Screw in oil drain pipe
7. Place a container under-
neath
8. Raise compressor slowly
9. Raise compressor slowly.
10. Unscrew oil fill cap
(with dipstick)
11. Drain oil into collection
basin
12. Remove oil drain pipe
13. Replace oil drain plug
14. Add new oil through the
oil filler neck slowly
(300ml)
15. Check oil level with the
dipstick.
To Next Page
Loading...