Konami Mocap Boxing - Game Settings; Game Performance Check

5 Game settings
5-l Checking the game performance )
not turned ON, either.
*Do not change the DIP switch setting of the machine tt other than factory
setting.
*If an abnormality persists or the machine does
immediately turn OFF the main power switch, unplug 8 power cord from
the receptacle and contact your nearest dealer.
I
n Result of test
11111-111m111111m
+
111mm1111
If test is OK
The machine goes to the game mode and the demonstrap/on game starts.
If any abnormality is detected
I
“BAD” or “ERRORappears on the screen, and the check ‘1s repeated.
If “OPTION SETTINGS BACKUP DATA ERROR.”
appears, press the test button on the service panel.
(The settings will revert to the factory settings.)
If “RECORD BACKUP DATA ERROR.“appear, press the ,,, button on the
service panel.
(The ranking record will revert to the factory setting.) (
. If “BOOKKEEPING BACKUP DATA ERROR.“appear, press the test button on
the service panel.
(The bookkeeping data will revert to the factory setting.) (
If an abnormal display continues or the machine does nc+ operate normally,
immediately turn OFF the main power switch and contact your nearest dealer.
n Se~ingthetimer~r-~~~-~-~--~-~
wr
mm-m-m-mm
If the timer is not set yet in the “BOOKKEEPING”, the folio
the screen.
ng message appears on
“PLEASE SET THE TIME FOR THE 600KKEEPING”
~
up instead in the test
Without this setting,
14