6 installation and assembling
6-2 Spreading the foot sheet
*When spreading the foot sheet, flx the cabinet unit adjusters.
*Be sure to place the foot sheet directly on the floor.
*Do not apply any oil or sticky substance, such as wax, to the top surface
1
I
Stick the attached double-face tape
to the backside of the foot sheet
and place that on the floor.
*Place the foot sheet so that the
[E-j
2
I
Place the adjusters into the
recesses of the foot sheet.
3
I
With the double-face tape (applied
in Step 1 above), stick
.the
foot
sheet onto the floor.
*Make sure the foot sheet does not
bMEMOj
PIac+ the adjust&m into the recesses
Remove the release
Ii&d
the double-face
tapes and
place
the sheet bghtly
on
the floor
27
To Next Page
Loading...
