Konami Mocap Boxing - Maintenance; Coin Selector Replacement

7 Maintenance
7-1 Replacing the coin selector
SHOW to replace the coin selector
1111111111111mm111
A
/
*Before replacing the coin selector, be sure to turn OFF the main power
switch and unplug the power cord from the receptacle.
*Take care not to apply any load or impact to the maintenance door when
It is open.
*After closing the maintenance door, be sure to check that the door is locked securely.
*When replacing parts, be sure to use parts of the correct speciflcatlons.
Never use parts other than the specified ones.
*Strictly refrain from disassembly and repair of parts whieh are not indicated
In this manual, as well as settings and remodeiling.
1
I
2 I
3
I
4
Be sure to turn OFF the main power
switch and unplug the AC power
cord from the receptacle.
LWW
n
I I I
Open the maintenance door.
Release the levers that fix the coin
selector. See at right.
Slide the coin selector
and take it out.
‘to the right,
5
I
To fit a new coin selector
Fit the 2 projections of the coin
selector to their mating notches.
6
I
Lock the levers (in Step 3 above)
again, and close the maintenance
door.
32