7 Maintenance
7-4 Adjusting the monitor
The monitor has already been adjusted at the time of shipment, but it may be
readjusted as desired.
Whan
nriittrtinn
the
mon&orj
refer to “~CJ?~~N CHECK” and “COLOR CHECK” on
. . , ,
-.
.
-
-,
-
-
.
J
. -
-
pr
78
19.
*There
Is high voltage inside the machine
specialist should open the back door.
With the back door open, be very
careful not to touch the monitor and its nearby patts.
n
Monitoradjus~ent
PCB
--------------------II
The monitor adjustment PCB is located inside machine.
Open the upper door at
the back of the cabinet. The pcb is attached to the left wall of the cabinet.
37