Advanced features
5
Press until “Communication” appears.
6
Press
ENTER
,
ADVANCED FUNCTIONS
five times and then press
ENTER
. The
LCD
shows:
7
Use the numeric keypad to enter the one-digit identifier for the batch box you
want to assign to this one-touch key. Here, we’ve entered 5:
Note: To change an identifier already entered, press
CANCEL
to erase it.
Then re-enter the correct identifier.
8
Press
ENTER
. The
LCD
asks if you want to make additional settings for this
programmable one-touch number.
If you do not want to make additional settings, press
ENTER
. Skip to step 16.
If you do want to make additional settings, press and
ENTER
.
9
The
LCD
asks which resolution you want to use for this programmable one-
touch number.
10
Press until the mode you want appears.
Note: For any of the following settings, choose “-----” if you do not want to
specify the displayed setting for this programmable one-touch key.
11
Press
ENTER
. The
LCD
asks you to select a contrast mode for each programma-
ble one-touch number.
12
Press until the mode you want appears.
13
Press
ENTER
. The
LCD
asks if you want to turn the Fax & Copy feature on or
off for this programmable one-touch number.
14
Press until the mode you want appears.
15
Press
ENTER
.
16
Press
STOP
to return your machine to standby mode.
Fax & Copy :---
/
/Enter
Contrast :-------
/
/Enter
Resolution :-----
/
/Enter
Option :Off
/
/Enter
Batch Tx
Enter Box No. :5
Batch Tx
Enter Box No. :_
Type :Communication
/
/Enter
3.44
To Next Page
