Polled Transmission - (continued)
12-3
6. Set the original document.
See "Placing the Original on the Machine" (p. 6-5) for information about setting the docu-
ment.
7. Press [START].
The FK-102 Type-A scans the document and holds it in memory until the remote station
sends a polling command, which causes transmission of the stored document.
•
To cancel polled transmission, you have to delete the reserved document held in mem-
ory. See "Cancelling Reserved Jobs" (p. 6-35).
• If transmission fails, refer to "Cannot Send Messages" (p. 8-2).
HINT
HINTS
Polled
Transmission
Polling
Reception
Bulletin
To Next Page
