Placing the Original on the Machine - (continued)
2-19
Sending Multiple Originals from the Platen Glass
Originals that cannot be sent with the RADF can be sent by using the platen glass. In this
case, originals are sent by memory transmission.
1. If the FAX Basic screen is not displayed, press [FAX] on the
control panel to open the FAX Basic screen.
2. Select a remote station.
3. Set the desired functions as necessary.
4. Place the original on the platen glass and press STORE then
press [START].
5. Place the next original on the platen glass and press
[START].
Repeat this procedure until all originals to be sent have been scanned.
The scanned originals are stored in memory.
Simple Internet
Fax Transmission
Transmi tt ing Do cument s to
Internet Fax/Computer
Transmit tin g to Both
Co nv en tio na l F ax an d E- Mail
Placing the Original
on the Machine
Setting Transmission
Conditions
Method for Specifying
Ad dr ess e s
Scanning
Canceling
Transmission
Co nfi rming Re se rved
Do cum en ts
Co n f ir min g
Communicatio n Result s
To Next Page
Loading...
