Konica Minolta Bizhub 4020 User Manual

User's Guide
- 175 -
Set Date and Time menu
Use
To
Current Date and Time
View the current date and time settings for the printer.
Manually Set Date and Time
[input date/time]
Enter the date and time.
Notes:
• Manually setting the date and time sets Enable NTP to No.
• The wizard lets you set the date and time in YYYY-MM-DD-HH:MM format.
Time Zone
[list of time zones]
Select the time zone.
Note: GMT is the factory default settings.
Automatically observe DST
On
Off
Set the printer to use the applicable daylight saving time (DST) start and end
times associated with the printer Time Zone setting.
Note: On is the factory default setting.
Enable NTP
On
Off
Enable Network Time Protocol, which synchronizes the clocks of devices on a
network.
Notes:
• On is the factory default setting.
• This setting is turned off if you manually set the date and time.

Konica Minolta Bizhub 4020 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Duplex Printing	Yes
Scanner Type	Flatbed with ADF
ADF Capacity	50 sheets
Memory	512 MB
Processor	800 MHz
Connectivity	USB 2.0, Ethernet
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac, Linux
Print Speed (Black)	42 ppm
Copy Speed (Black)	42 cpm
Paper Sizes Supported	A4, A5, A6, B5, B6, Letter, Legal
Network Connectivity	Ethernet