Konica Minolta Bizhub 4020 User Manual

User's Guide
- 304 -
Action
Yes
No
Step 1
1. Make sure the size of the paper loaded in the tray matches the fuser
type.
Note: Use a 110-volt fuser for printing on letter-size paper and a 220-
volt fuser for printing on A4-size paper.
2. Resend the print job.
Does the print speed increase?
The problem is
solved.
Go to step 2.
Step 2
1. Replace the fuser. For more information on installing the fuser, see the
instruction sheet that came with the part.
2. Resend the print job.
Does the print speed increase?
The problem is
solved.
Contact technical
support.
Job prints from the wrong tray or on the wrong paper
Action
Yes
No
Step 1
1. Check if you are printing on paper that is supported by the tray.
2. Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is
solved.
Go to step 2.
Step 2
1. From the Paper menu on the printer control panel, set the paper size
and type to match the paper loaded in the tray.
2. Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is
solved.
Go to step 3.

Konica Minolta Bizhub 4020 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Duplex Printing	Yes
Scanner Type	Flatbed with ADF
ADF Capacity	50 sheets
Memory	512 MB
Processor	800 MHz
Connectivity	USB 2.0, Ethernet
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac, Linux
Print Speed (Black)	42 ppm
Copy Speed (Black)	42 cpm
Paper Sizes Supported	A4, A5, A6, B5, B6, Letter, Legal
Network Connectivity	Ethernet