Konica Minolta Bizhub 4020 User Manual

User's Guide
- 43 -
c. Align the screws on the printer hard disk to the slots on the controller board bracket, and then
slide the printer hard disk onto the brackets.
d. Tighten the two screws.
4. Close the controller board shield, and then close the controller board access door.
Note: When the printer software and any hardware options are installed, you may need to manually
add the options in the printer driver to make them available for print jobs. For more information, see
Updating available options in the printer driver.
Removing a printer hard disk
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch something metal on the printer before touching any controller board electronic
components or connectors.
1. Access the controller board.
For more information, see
Accessing the controller board.
Note: This task requires a flathead screwdriver.

Konica Minolta Bizhub 4020 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Duplex Printing	Yes
Scanner Type	Flatbed with ADF
ADF Capacity	50 sheets
Memory	512 MB
Processor	800 MHz
Connectivity	USB 2.0, Ethernet
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac, Linux
Print Speed (Black)	42 ppm
Copy Speed (Black)	42 cpm
Paper Sizes Supported	A4, A5, A6, B5, B6, Letter, Legal
Network Connectivity	Ethernet