Konica Minolta Bizhub 4020 User Manual

User's Guide
- 257 -
• If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the
latch on the right side of the tray toward the front of the tray until it clicks into place.
• Use the handholds located on both sides of the printer to lift it.
• Make sure your fingers are not under the printer when you set it down.
• Before setting up the printer, make sure there is adequate clearance around it.
Use only the power cord provided with this product or the manufacturer's authorized replacement.
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the
printer warranty.
Moving the printer to another location
The printer and its hardware options can be safely moved to another location by following these
precautions:
• Any cart used to move the printer must have a surface able to support the full footprint of the printer.
• Any cart used to move the hardware options must have a surface able to support the dimensions of
the hardware options.
• Keep the printer in an upright position.
• Avoid severe jarring movements.
Shipping the printer
When shipping the printer, use the original packaging.

Konica Minolta Bizhub 4020 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Duplex Printing	Yes
Scanner Type	Flatbed with ADF
ADF Capacity	50 sheets
Memory	512 MB
Processor	800 MHz
Connectivity	USB 2.0, Ethernet
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac, Linux
Print Speed (Black)	42 ppm
Copy Speed (Black)	42 cpm
Paper Sizes Supported	A4, A5, A6, B5, B6, Letter, Legal
Network Connectivity	Ethernet