Konica Minolta Bizhub 4020 User Manual

User's Guide
- 293 -
Action
Yes
No
Step 4
1. Check if the internal option is selected.
It may be necessary to manually add the internal option in the printer
driver to make it available for print jobs. For more information, see
Updating available options in the printer driver.
2. Resend the print job.
Does the internal option operate correctly?
The problem
is solved.
Contact technical
support.
Internal Solutions Port does not operate correctly
Action
Yes
No
Step 1
Make sure the Internal Solutions Port (ISP) is installed.
1. Install the ISP. For more information, see Installing an
Internal Solutions Port.
2. Print a menu settings page, and then check if the ISP is
listed in the Installed Options list.
Is the ISP listed in the Installed Options list?
Go to step 2.
Check if you have a supported ISP.
Note: An ISP from another printer
may not work on this printer.
Step 2
Check the cable and the ISP connection.
1. Use the correct cable, and then make sure it is securely
connected to the ISP.
2. Check if the ISP solution interface cable is securely
connected into the receptacle of the controller board.
Note: The ISP solution interface cable and the
receptacle on the controller board are color-coded.
Does the Internal Solutions Port operate correctly?
The problem is
solved.
Contact technical support.

Konica Minolta Bizhub 4020 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Duplex Printing	Yes
Scanner Type	Flatbed with ADF
ADF Capacity	50 sheets
Memory	512 MB
Processor	800 MHz
Connectivity	USB 2.0, Ethernet
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac, Linux
Print Speed (Black)	42 ppm
Copy Speed (Black)	42 cpm
Paper Sizes Supported	A4, A5, A6, B5, B6, Letter, Legal
Network Connectivity	Ethernet