bizhub 652/552 7-3
7.1 Memory RX (G3/IP/I-FAX)
7
7 Convenient functions (G3/IP/I-FAX)
This section explains the convenient functions for fax transmission.
7.1 Memory RX (G3/IP/I-FAX)
Received documents can be saved and printed as required. This function is referred to as memory reception.
Received documents are saved in the Memory RX User Box. Access the User Box and print the document.
Unnecessary documents can be deleted as well.
d Reference
For details on printing or deleting documents saved in User Boxes, refer to the [User's Guide Box Operations].
Reference
- When the IP address fax or Internet fax is received, and the received data is not supported, it is dis-
carded and not printed. For details, refer to page 6-5 (Internet fax) or page 6-6 (IP address fax).
7.2 Fax forwarding (G3/IP/I-FAX)
Received documents can be forwarded to the pre-set destination. The following shows the available func-
tions.
- This machine can be configured so that it forwards the document and prints the same document.
- If two units of Fax Kit FK-502 are installed for receiving/forwarding data with G3 Fax, the line used to
forward the data can be specified.
Reference
- These functions can be specified in [Fax Settings] - [Function Settings] - [Forward TX Setting] in Admin-
istrator Settings. For details, refer to page 10-26.
- When the IP address fax or Internet fax is received, and the received data is not supported, it is dis-
carded and not printed. For details, refer to page 6-5 (Internet fax) or page 6-6 (IP address fax).
To Next Page
Loading...
Need help?
General
