bizhub 751/601 (Version 2) 7-31
Copy paper/originals
7
7.4 Originals
When making copies, load the original into the ADF or position it on the original glass.
To copy originals that cannot be loaded into the ADF, position them on the original glass.
7.4.1 Originals that can be loaded into the ADF
There are two methods for using the ADF. The machine will detect the original size automatically when the
original is positioned in the ADF, then select an appropriate paper size automatically by Auto Paper Select
function.
There are limits on the types of original that can be positioned with each method.
- Normal method
- For originals of mixed sizes
- For Z-folded original
Normal method
Mixed Original Setting
The following chart shows the possible combinations of standard- size paper that can be used with the
"Mixed Original" setting.
Z-Folded Original Setting
Item Description
Original paper weight 50 g/m
2
to 200 g/m
2
Original size 100 mm e 139.7 mm to 297 mm e 431.8 mm
Auto original size detect A3 w to A5 w/v, 11 e 17 w, 8-1/2 e 11 v
Curling tolerance 10 mm or less
Paper capacity 100 sheets (80 g/m
2
)
Item Description
Original paper weight 50 g/m
2
to 200 g/m
2
Auto original size detect Two types of size combination are determined by the ADF guide width.
Width of A3 w/A4 v:
A3 w, B4 w, A4 w/v, B5 v, A5 v
Width of B4 w/B5 v:
B4 w, A4 w, B5 w/v, A5 v
Width of A4 w/A5 v:
A4 w, B5 w, A5 v
Width of A5 w: A5 w, B6 w
Curling tolerance 10 mm or less
Paper capacity 100 sheets (80 g/m
2
)
Item Description
Original paper weight 50 g/m
2
to 200 g/m
2
Original size 100 mm e 139.7 mm to 297 mm e 431.8 mm
Auto original size detect A3 w to A5 w/v, 11 e 17 w, 8-1/2 e 11 v
Curling tolerance 10 mm or less
Paper capacity 100 sheets (80 g/m
2
)
To Next Page
Loading...
Need help?
General
