Konica Minolta bizhub 751 User Manual

bizhub 751/601 (Version 2) 12-63
Utility mode
12
10 Check the print result.
– Check that the distance between the staples was adjusted.
– If more adjustment is necessary, repeat steps 6 through 10.
12.6.11 Post Inserter Tray Size Adjustment
The sensors for detecting the size of paper loaded in the paper trays of the optional post inserter can be
adjusted.
2
Note
[Post Inserter Tray Size Adjustment] appears only if optional post inserter is installed.
1 Display the Administrator Setting screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 12-42.
2 Touch [1 System Settings].
The System Settings screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5 Touch [Forward ], and then touch [2 Post Inserter Tray Size Adjustment].
The Post Inserter Tray Size Adj. screen appears.
6 Load the selected paper in the paper tray for the post inserter, and then press the [Start] key.
7 Touch [Close].

Konica Minolta bizhub 751 Specifications

General

Monthly Duty Cycle	300, 000 pages
Copy Resolution	600 x 600 dpi
Printing Technology	Laser
Duplex Printing	Standard
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Scanning Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Print Speed	75 ppm
Scan Speed	75 opm (originals per minute)
Connectivity	Ethernet, USB
Zoom Range	25% - 400%
Operating System Compatibility	Windows, Mac, Linux