Konica Minolta bizhub 751 User Manual

9
Replacing toner cartridges and staple cartridges and emptying hole-punch scrap box
9-18 bizhub 751/601 (Version 2)
9.3 Emptying hole-punch scrap boxes
If the hole-punch scrap box of the punch kit installed with the finisher becomes full, the message shown
below appears (if the box can be emptied by the user).
2
Note
The setting for emptying the hole-punch scrap box should be specified by the service representative.
For details, contact the service representative.
The default setting is "Service". If a message appears, immediately contact the service representative.
<Screen when a Punch setting is selected>

Konica Minolta bizhub 751 Specifications

General

Monthly Duty Cycle	300, 000 pages
Copy Resolution	600 x 600 dpi
Printing Technology	Laser
Duplex Printing	Standard
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Scanning Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Print Speed	75 ppm
Scan Speed	75 opm (originals per minute)
Connectivity	Ethernet, USB
Zoom Range	25% - 400%
Operating System Compatibility	Windows, Mac, Linux